Design performances of DTS type resistance thermometers with switch head (XX5 model)
Design performances of DTS type resistance thermometers with switch head (XX5 model)
* The length of the mounting part L is selected when ordering.
** on special. The order is possible to manufacture sensors with pipe thread.
Constructive completion of the switching head for XX5 models
| Constructive execution | Standard execution | Increased |
| Plastic | ||
| Metal |
Designation when ordering
Sensors with a 2-wire compound circuit are made with a long mounting part of no more than 250 mm. Sensors with a metal head and two sensitive elements are made only with a 2-wire connection scheme. Constructive execution of heads – see table
An example of the designation when ordering: Aries DTS045-100m.V3.120.mg
This means that the impedance thermometer 100m, model 045, tolerance class B, with a three-wire diagram of the connections, the length of the mounting part 120 mm, the metal switching head, is subject to manufacture and delivery.
An example of the designation when ordering: Aries DTS125-100m.V2.80
This means that a copper resistance thermometer 100m, model 125, tolerance class B, with a two-wire diagram of connections, length of immersible part of 80 mm is subject to manufacture and delivery.
